Rubio Monocoat SheenPlus is a 0% VOC sheen enhancer that provides a durable satin look to wooden surfaces that have been finished with Rubio Monocoat Oil Plus 2C wood finish. This product may be applied on all indoor wood surfaces, including furniture, countertops, tables, stairs, walls, floors, etc., finished with Oil Plus 2C. The combination of the oil (A) and accelerator (B) ensures a fast cure time, resulting in excellent protection. Plus, it's solvent and water-free.

Sheen Enhancer: Increase the sheen on surfaces finished with Oil Plus 2C. SheenPlus achieves a long-lasting satin finish that complements any colour of Oil Plus 2C, giving your creations a timeless allure. 

Easy Application: Save time and labor with an efficient one-layer application. Experience rapid curing, no overlaps, and the flexibility to apply by hand or machine.

Easy Maintenance: Hello stress free maintenance! SheenPlus offers a significant edge over traditional build finishes by eliminating the need for sanding during recoats. Furthermore, freshly renovated surfaces are ready for light use within just 24 hours, and the added perk of local repairs makes it a breeze to keep your surfaces in top-notch condition.

Eco-Friendly: SheenPlus is 0% VOC, 100% solid content, and made from natural ingredients, making it safe for the user and the environment. The high spread rate also means reduced packaging and transport costs. Certified toy safe. 

Polyurethane Alternative: Avoid building up multiple layers of plastic over your wood surface. SheenPlus is a polyurethane alternative with the following advantages: eco-friendly, applies in 1 additional layer, can be locally repaired, no need for intercoat abrasion, no need for sanding prior to recoat. Keep the look and feel of real wood but with an added luster. 

Application on furniture and tables

1. Let the Oil Plus 2C dry for at least 24 - 36 hours.
2. Thoroughly mix the two SheenPlus components together for 1 to 2 minutes, ensuring a ratio of approximately 3 units A to 1 unit B.
3. Apply a small amount of SheenPlus with a brush and spread further with a Red Applicator Pad. Within 15 minutes, go over the same surface again with the Red Applicator Pad without adding additional product, ensuring that the oil is distributed evenly.
4. Finish this area with a White Applicator Pad until the surface is completely even and rubbed dry.
5. Remove any streaks and/or surface irregularities with a lint-free cloth.
6. Immediately after wiping with the cloth, wipe the oiled surface one more time with the same white pad that was used in step 4 (make sure to use the oily side of the pad to do this final step). Wipe the surface in a circular motion and finish wiping the surface in the length of the boards to finish the SheenPlus application.
7. Let dry for at least 24 hours before light use of the surface. To ensure effective drying and curing, it is important to maintain proper ventilation and temperature. Full curing takes place in 7 days.